Caring for your steel bottle: cleaning, dents and the cap seal
Three habits that make a stainless steel bottle last for years instead of months.
A stainless steel bottle, looked after properly, outlasts most things in a kitchen drawer. Here’s what actually matters.
Rinse it every day, not just when it smells
Water left sitting for a day or two grows a film you can’t always see or smell yet. Rinse the bottle with warm water after each use, and give it a proper wash with soap and a bottle brush every couple of days — more often if you’ve had anything but plain water in it.
Leave the cap off to dry
This is the one habit that matters most. A closed cap traps moisture against the seal, and that’s what eventually makes a bottle smell musty or the seal wear out early. After washing, leave the cap resting loosely on top or set to one side until the bottle is fully dry, then close it for storage.
Dents won’t hurt it, rust will
A stainless steel bottle like our Classic Steel Bottle is dent-resistant, not dent-proof — a hard knock can leave a mark, and that’s cosmetic, not a problem. What you do want to avoid is scouring it with steel wool or leaving it in standing water for days, both of which can wear through the finish over time and let the metal underneath corrode.
Washing the cap properly
Most leaks come from the cap, not the bottle. Unscrew it fully every week or so and rinse out the thread and the silicone seal — grit and residue collect there first, and a dirty seal is the usual cause of a “leaky” bottle that was never actually faulty.
Looking for a bottle that’ll stand up to daily use? See the full range in the shop.
#guide#care